Honda Element engine parts diagram: cooling system, ignition system and injection system diagrams for Honda Element 2.4. The full description of Honda Element cooling system, Honda Element ignition system, Honda Element injection system and all diagrams necessary for repair.
Cooling system
In the given engines the liquid system of cooling of the closed type with a compulsory coolant circulation is used. The drive gear of the pump of a cooling fluid is carried out by a belt of a drive gear of hinged units.
The thermostatically controlled chamber with the valve is located in an inlet branch pipe of a cooling fluid and urged to maintain optimum temperature in cooling system, starting up a cooling fluid on small or big (through a radiator) a cooling circle.
Lubricating system
In the engine the lubricating system with full-flow clearing of oil and with an oil supply under pressure to the basic moving details and engine knots is used. The oil pump. In it leading and conducted rotors with an internal toothing which rotate in one direction are located. The drive gear is carried out by a chain from a bent shaft.
Ignition system
The ignition system consists of a control package the engine / the power unit and four ignition coils.
Ignition coil: 1 - a primary coil, 2 - a secondary coil.
Air injection system
System of giving of additional air to spray jets
The system brings additional air to an injection nozzle. Injected fuel mixes up with submitted air that mixture fuel-voedushnoj promotes the best evaporation of fuel and the best preparation, it reaches uniformity of a combustion procedure even at the impoverished mixture. Therefore the quantity of hydrocarbons (NANOSECOND) in the fulfilled gases decreases, start-up on not the hot engine and on high-mountainous sites is facilitated. Air giving is regulated by the valve established in a branch pipe of system of cooling. At change of temperature of a cooling fluid the volume of a sensitive element (paraffin) therefore the size of opening of the valve and quantity of submitted air is regulated varies.
System of giving of additional air to spray jets: 1 - the valve of system of giving of additional air to spray jets, 2 - a broad element from paraffin, 3 - a spray jet, 4 - air, 5 - the valve, 6 - fuel-air a mixture.
